Centrifugal medium and high pressure fan is intended for transportaion of non-explosive air-gas mixtures, not causing rapid corrosion of metal of flow part of the fan (corrosion speed not more than 0,1 mm per year), with contents of dust and other solid admixtures not more than 0,1 g/cub.m and temperature up to 80 deg. Ñ, containing no adhesive or fibrous materials.
The fan is intended for the extraction technology and can be used in various ventilation systems.
Working temperature for the fan is from -40 to +40 deg. C and proteátion of engine from direct sunlight and atmospheric precipitates is necessary.
The fan body is made of 1-2 mm sheet steel and painted by high-quality powder paint, which provides high protection of the body against environmental influence.
The impeller is made of aluminum and allows to move air polluted with welding fume, exhaust gases, oil mist, different types of dust and so on.
The impeller spinning direction is left / right, looking from the side of inlet pipe.
Electric motor with increased life time provides perferct operation and exceeded life time of the fan.
Inlet pipe of the fan has round cut and outlet pipe has a rectangular cut.
The fan is supplied with mounting bracket, which allows to install a fan on it and fix it to any surface.
|FUK-xxxx/SP||Typical fan, left-hand rotation.|
|FUK-xxxx r/SP||Same as above, but right-hand rotation.|
|FUK-pxxxx/SP||High-pressure fan, left-hand rotation.|
|FUK-pxxxxO/SP||Same as above, but designed for outside use. Engine needs no protection.|
|FUK-pxxxxO r/SP||High-pressure fan, right-hand rotation, design for outside.|
|Model||Electrical motor||*Best performance||Voltage,|